Manufacturer Li-ion Battery Nickel Alloy Strip 18650 Nickel Strip for Lithium Battery

Thickness: 0.05-3.0mm
Trademark: Hannstar Industry
Transport Package: Standard Export Package or as Customers′design
Specification: Elongation (> %): 15
Origin: China
18650 nickel strip 
Grade:Ni200,Ni201,N4,N6
High quality
Excellent corrosion resistance 
good mechanical strength
 
 
Alloy Description  
Nickel 200/201 is most widely used grade, generally specified for transistor caps, anodes for electronic tubes, leads of electronic components / Lead-in-Wires for lamps and for Wire-Mesh. Also used in strip form for various applications including Ni-Cd batteries.
 
Condition of Supply 
Nickel 200, 201 and 205 are supplied in the following conditions:
Cold Drawn, Special Temper.
Cold Drawn, Annealed. Straightened and Cut Lengths.

Note: 
NUS N02201 (ASTM B 162) same as N4 (GB/T 2054). 
NUS N02200 (ASTM B 162) same as N6 (GB/T 2054).
 
Forms 
Coil - Strip, Foil, Ribbon
Wire - Profile, Round, Flat, Square
rod, bar, forgings, plate, sheet
 
 
Chemical composition  
Grade Ni+Co Cu Si Mn C Mg S P Fe
N4 99.9 0.015 0.03 0.002 0.01 0.01 0.001 0.001 0.04
N6 99.6 0.10 0.10 0.05 0.10 0.10 0.005 0.002 0.10
Ni201 99.0 ≤0.25 ≤0.35 ≤0.35 ≤0.02   / ≤0.01 / ≤0.40
Ni200 99.0 0.20 0.30 0.30 0.15 / 0.01 / 0.40
 
Nickel foil, strip Capabilities
Grade Pure Nickel Strip 99.6% / 99.9%
Thickness 0.02 to 2.50 mm
Tolerances +/- 5% (special tolerances is available)
Width Up to 350mm wide
Coil size Up to 80 kg without welds
Temper Ranges Annealed to Full Hard
 
Nickel Foil, Strip Product Precision
Thickness Thickness allowance Burr height Width scope and tolerance
2≤w<10 10≤w<50 50≤w<100 100≤w<150 150≤w<200 200≤w
0.02≤t<0.05 ±0.003 ≤0.005 ±
0.05		 ±0.10 ±0.15 ±0.20 ±0.30 ±0.50
0.05≤t<0.1 ±0.005 ≤0.01
0.1≤t<0.2 ±0.008 ≤0.015
0.2≤t<0.3 ±0.012 ≤0.02
0.3≤t<0.4 ±0.015 ≤0.03 ±
0.10		 ±0.15 ±0.25 ±0.50 ±0.80 ±1.00
0.4≤t<0.6 ±0.025 ≤0.05
0.6≤t<0.8 ±0.030 ≤0.06 ±
0.30		 ±0.40 ±0.50 ±0.50 ±0.80 ±1.00
0.8≤t<1.0 ±0.040
1.0≤t<1.2 ±0.050 ≤0.08 ±
0.50		 ±0.50 ±0.80 ±1.00 ±1.00 ±1.50
1.2≤t<1.4 ±0.060
1.4≤t<1.7 ±0.070 ≤0.10
1.7≤t<2.0 ±0.080
 
What are the characteristics of Nickel Foil, Strip?  
High degree of electrical conductivity
Low electrical resistivity
Excellent surface and slit edge conditions
Enhanced solderability as a result of low surface oxides
Excellent formability with deep draw characteristics with reduced die wear
Resistance to grain growth
 
Application:
In what applications is Nickel Foil, Strip used?
Rechargeable Batteries (Nickel Metal Hydride, Lithium Ion)
Metal Stampings
Lead Frames
Gaskets and Seals
Lighting Applications
Superconductor Applications
Weld Wire

Round Permanent Magnet

Round Permanent Magnet,Diameter 11Mm To 30Mm,Diameter More Than 31Mm,Long Cylinder Magnet

Haoqi Magnetic Materials Co., Ltd. , http://www.sh-magnet.com

This entry was posted in on