The balcony is rest, recreation, sports, relaxing place, so the balcony of decoration is particularly important; so, what tiled balcony attached to it good? Tile laying standards and precautions what? Let's take a look with Xiaobian.
What tiles are good on the balcony?
1. Whole body brick : Because the surface of the whole body brick is not glazed, the color of the front and back sides and its material are the same. This kind of ceramic tile is very wearable, but the color and patterns are not very rich, not glazed. Bricks. Generally used in balconies, aisles and other places.
2. Vitrified brick: It is a kind of bright brick that has been polished on the surface of the whole brick body. It has low water absorption, strong hardness and good wear resistance. It is suitable for living room, bedroom, balcony, aisle and so on.
3, antique tiles : antique tiles are ordinary tiles, textures on the past to imitate the old style, antique tiles, low water absorption, slip resistance, high wear resistance, generally applies to places with high traffic, such as the living room, bedroom, balcony Aisle and so on. For example, Hudson's antique brick sand HDCW20 anti-skid, wear-resistant, fearless sun exposure, suitable for use in the balcony.
4, Mosaic : Mosaic is not only wear-resistant, but water is not easy to penetrate, the ability to resist pressure is also very strong, not easy to break off. Mosaic is more suitable for small-scale use to show his characteristics, such as bathrooms, kitchens, balconies and so on.
In addition to considering the tile style when choosing a balcony tile, you have to consider the tile brand.
Tile laying standards and precautions
Tile Laying Considerations - Soaking Water
The most important step in tile paving considerations is the fact that the tiles have many fine gaps regardless of their quality. When used, they have a certain degree of water absorption. If they are not treated with water, or if the water is not sufficient, If the tiles are directly applied, the tiles will absorb the water in the cement, which will cause gaps in the connecting part between the tile and the cement, making the adhesion insecure, causing problems such as empty drums and tiles falling off. When the tile is soaked in water, it must be completely infiltrated into the water, and the time is usually about 30 minutes.
Tile Laying Considerations - Wall Surfaces
The treatment of the wall surface in the tile-laying considerations also appears to be extremely important. Before the tiling, the wall surface must be carefully inspected. Any cracks in the wall must be dealt with first. In the decoration, the wall surface is often puttyed. If there is no scraping off of the putty, then there will be a big safety risk. The surface of the putty will not be able to hang on the cement, which will easily cause the phenomenon of tile shedding. Therefore, in the wall tiles Paving must pay attention to the treatment of the wall.
Tile Laying Considerations - Adhesives
It is also very important for the adhesion of the tiles to be noticed in the attention of the tiles. This not only saves the decoration cost, but also makes the tiles more firm and beautiful. Must choose the correct cement label and the mixing proportion of cement sand. The improper mixing ratio of cement sand or the high cement label will cause the cracking and detachment of the tile. The higher the proportion of cement, the stronger the bonding force of the tile, but the high proportion of cement mixing , It will lead to an increase in the coefficient of expansion of the cement mortar, easily causing the tiles to be cracked after being tiled. Generally, the ratio of the tile adhesive agent is 1:3 for the wall tile, 1:2 for the floor tile, and 32.5 for the cement.
Tile Laying Considerations - Crevices
For tile production, slight deviations in straight angle, length, straightness, etc. may exist in the same batch of products of the same model. In the construction process, there will be a certain degree of error for tile tiles that are more or less the same. The most important point is that the tiles will be affected by the phenomenon of thermal expansion and contraction, so be sure to leave enough gaps in the tiles to allow it to have a certain shrink space, so that after a long time use will not be the appearance of the tiles Influencing, from the above, it is also important for tile gaps to be aware of tile-laying considerations.
Tile Laying Considerations - Cleaning
One of the important points in tile paving considerations is the timely cleaning of the tiles. When the tiles are tiled, the excess adhesive material in the gaps in the tiles is removed in a timely manner, and the tile is wiped off with wet cotton cloth. Surface stains, do not wait until the adhesive material is dry before cleaning and wiping, this will not only not clean the tile surface, but also on the tile surface glazed layer damage, affect its use and aesthetics, in the bonding material After solidification, the joints can be brushed with white cement, gypsum plaster, and color paste.
The above tiles on the balcony posted a good introduction to here, and I hope to help you. For more information, please visit this website. Stay tuned.
Balcony balcony decoration tile tile
By using the mechanical and thermal properties of glass ceramics such as high temperature resistance, thermal shock resistance, thermal expansion and other mechanical properties, it is possible to manufacture a variety of materials that meet the mechanical requirements. Using mica's machinability and orientation, it is possible to produce high-strength and machinable glass ceramics. As a mechanical mechanics material, glass ceramics can be widely used in pistons, rotating blades and cookware, and can also be used as structural materials for aircraft, rockets, and artificial satellites.
Machinable Glass Ceramic Plunger,Glass Prefilled Syringe Using,Stainless Steel Plunger,Glass Coffee Plunger
Dongguan Haikun New Material Co., Ltd. , https://www.hkceram.com