1. First, inspect the position of all embedded parts and check the flatness of the surface. If any unevenness is found, it must be leveled and properly processed. Ensure that all connection points meet the required standards before proceeding.
2. Position the upper platen carefully in its designated location.
3. Lay the base film on the foundation. The base film has several flange connection points; align these with the embedded flanges on the foundation, punch them, and secure them to the flanges. During installation, personnel should not wear sharp objects and must remove their shoes or wear rubber-soled shoes to avoid damaging the film.
4. Place the inner membrane over the already installed base film, followed by the outer membrane. Be cautious to avoid scratches during this process. Align the edges of the inner and outer membranes evenly with the embedded parts manually, then check for dimensional deviations and make necessary adjustments.
5. Install the rubber seal on the embedded part of the base. Ensure the seal's interface is properly glued using a special adhesive.
6. Once everything is in place, punch the bottom film, inner film, and outer film together using a punch. When punching, first press down the two ends of the pressure plate to secure the membrane, then release the pressure and tighten the bolts.
7. Install the constant pressure gas pipe and place the constant pressure control cabinet at least 10 meters away from the tank. If this distance cannot be maintained, an explosion-proof gas pump must be used. Connect the voltage regulator system and detection system (this part should be installed by professionals, so no detailed instructions are provided here).
8. Install the safety valve. If it's a water-sealed type, add antifreeze to the designated area to prevent freezing.
9. Start the system and begin the operation.
10. Check and inflate both the inner and outer membranes. Use a leak detection liquid to thoroughly inspect for any leaks, and address any issues found promptly.
This procedure ensures proper installation, safety, and performance of the membrane system. Always follow safety protocols and use appropriate tools and materials.
Oval Ring Joint Gasket ,Oval Ring Gasket,Oval Ring Joint Gaskets,Oval Rtj Gasket
WENZHOU JINGWEI SEAL TECHNOLOGY CO., LTD , https://www.ringjoint-gasket.com