In the home improvement, there is nothing in the clear bag and half bag. If it is all-inclusive, the most fear is that the construction unit shoddy, and cut corners. Looking at some decoration disputes, such things are common in the decoration industry. The ultimate victim is our pretend property owners. So, how can we avoid the construction unit shoddy, cut corners? As an owner, whether it is a pre-renovation inspection or a construction process, it is necessary to be aware of autumnal matters and avoid self-employment.
Uniform solid wood furniture   Ketu Sofa
Ground construction is the key to cutting corners
In all the projects of home renovation, the floor decoration is a project that requires the owners to pay special attention. It is better not to have problems in this project because once there is a problem, the original floor or floor tiles will need to be dismantled to give the occupants a living. Bring great inconvenience.
1, find the horizon: Be careful "more and more uneven."
Frequent tricks: Some houses are not well-grounded and must be leveled to smooth the tiles and floors. But often there are some workers who are not careful, the process of leveling carelessness, resulting in the ground "more and more injustice," which will seriously affect the subsequent construction of the ground decoration.
Solution: In order to avoid the situation that the ground is “more and more unevenâ€, it is the best method to measure the flatness with a horizontal ruler during the decoration process. Leveling the ground before you can proceed with the next step.
2, tile paving: the amount of cement should be reasonable
Common tricks: In the process of laying tiles, the workers are often cut corners and dropped off. The most common way of cutting corners and materials is when cement is applied only around the tiles or the cement ratio is not reasonable.
Solution: During construction, workers must follow up on the situation of tiling and avoid cutting corners. Tiling bricks are generally used in a ratio of 2:1. When laying, you must apply cement to the entire tile. After paving, you must check the empty condition of the tiles and find that empty drums should be repaved immediately.
3, floor paving: height difference with floor tiles
Common tricks: If the living room and bedroom are tiled with floor tiles, it is easy to cause height differences after laying because of construction workers' negligence. The floor is often higher than the floor tiles, which seriously affects the appearance and usability.
Solution: In the installation of floor and paving tiles, we must plan well, estimate the height after paving, find the ground or lay the construction of the keel to make the surface as flat as possible to reduce the height difference.
Wall construction must be careful and tricky
Renovating the wall surface construction is an essential part of home decoration, including wall grooving, painting, paving wallpaper, etc. If your home wall is not well handled, it will leave many hidden dangers. And there are many common corner-cutting situations when the wall decoration, the owners must pay more attention to avoid leaving decoration regret.
1, substrate treatment: prevent putty is not flattened
Common tricks: Substrate treatment is a necessary process for wall decoration. The most frequently used cases of cutting corners when dealing with substrates are that when the second-hand houses are remodeled, some construction teams save time and workload. Without the removal of the original paint on the wall, the tiles were tiled or painted, which resulted in the unevenness of the remodeled wall, and even the appearance of falling paint and bricks.
Solution: Remind the owner to check the wall treatment before painting and paving the wall. Check whether the wall putty is scraped and whether the wall surface is smooth or not.
2. Wall ticking: careful destruction of bearing walls
Common trickery: When burying pipelines, some construction workers blindly cut in order to save time and not only damage the building's load-bearing wall structure, but also cause the pipeline buried in the wall to be destroyed.
Solution: At present, when burying underground pipelines, in order to ensure construction quality and progress, it is necessary to confirm the pipeline direction with the person in charge of the construction team and confirm the position of the load-bearing wall in the house. If it is not necessary, the load-bearing wall does not need to be grooved. Walls with insulation layers also avoid slotting as much as possible to avoid cracking after construction.
3, wall painting: brushing times can not be less
Common tricks: The most common way to cut corners and paints when painting a wall is to add more water to the paint when it is fresh, or to reduce the number of paint passes, in order to reduce the amount of paint and eventually cause the coating to be too thin. Some of the construction teams laid back their work during the painting process, resulting in minor color differences on the wall after renovation.
Solution: When using latex paint, you must add a certain percentage of fresh water. When painting, paints of the same color are best painted once. When the supervisor applies the brushing construction, the construction team must ask the construction team to ensure the number of brushing passes on both sides. In addition, in order to prevent workers from cutting corners, you can choose to use yellow putty, so it is easy to see if the wall is completely painted.
The most hidden of hydropower projects to prevent construction problems
Hydropower projects include the most important water supply and drainage projects and wire and cable projects. Hydropower projects are important projects for decoration and construction, and they are also the most hidden projects. As a matter of personal safety and property safety issues, it is imperative to build a construction site. As an owner, it is also necessary for the owner to understand the jerks that often appear in construction work.
1, the water pipe decoration: guard against cement plugging the pipeline
Common tricks: After the construction, the remaining cement sand must be cleaned. Some construction teams will directly pour cement sand into the sewage pipes in order to save time. The structure leads to unsmooth drainage pipes and even blockage.
Solution: The owner of the construction supervision needs to include the disposal of construction waste, clean up, rigorous workers dump the garbage into the sewer. After the construction, you can also check the situation of going to the water, fill up all the water storage equipment, and at the same time release water to see if the water can be drained smoothly.
3, circuit installation: circuit separation is not clear
Common trickery: Sometimes, in order to save materials, construction workers will use the remaining wires from other construction sites to put it together for use in your home. This will leave security problems for later maintenance.
Solution: According to the construction regulations, red is the FireWire color scale, blue, green or black is the zero line color scale, and the yellow-green color line is the ground line color scale. In a house, color patches need to be clearly identified and uniform color separation is used during installation. If there is no uniform separation of the installed lines, it is recommended that you mark them on the left side of the line and clearly mark them on the circuit trend chart for later review.
JS Common Caterpillar Float Window Decoration Entrance Decoration Paint Cement Decor Home Decoration Home Living Room Wall Color Decoration Living Room Floor Tiles Home Wallpaper Black Floor Decoration Home Decor Tile ld Tile Small Bedroom Floor Tile Decoration Home
Chandelier Light,Crystal Chandelier,Modern Chandeliers,Outdoor Chandelier
Foshan Nanhai Pinming Electrical Appliance Co.,Ltd , https://www.mavcadonf.com