The renovation of second-hand houses is more time-consuming, time-consuming and time-consuming than the new homes. However, as long as the craft standards can be maintained, the use of decorative paints can also make up for the shortage of old houses and revitalize second-hand houses.
First, the renovation of the old house wall, the top surface of the old house should focus on the decorative materials.
Among them, the wall coating is the most typical. The wall top layer of the old house will have different degrees of cracking, chalking and mildew after years of use. If these problems are not solved properly, the paint of the back brush will also appear color. Uneven effects of unevenness, rough surface and peeling. This requires an advanced pretreatment of the base layer such as the top surface of the wall.
Second, careful design.
Before renovating the old house, the decoration company should also carry out the overall design, involving the treatment of the facade wall, ceiling and other places. It is best to send professionals to conduct on-the-spot investigation of the house. Such as wall, floor, ceiling, etc., whether there are obvious cracks, whether it is flat, whether there is falling off and sanding. If the above problems exist, the base layer should be repaired. When repairing, it is best to use environmentally friendly interior wall putty. The product is environmentally friendly, non-toxic and non-irritating. No matter the old wall, it has very strong adhesion. Its strong permeability is like playing on the wall. Innumerable nails are added, so that the original cracked or powdered hollow wall is polished and smooth, smooth and smooth, and convenient for the construction of latex paint.
Third, the focus on the doors and windows to renovate the doors and windows in the old house should be one of the key points of the transformation.
The degree of photochemicalization of doors and windows (door and window decoration renderings) is divided into several cases. First, if the wooden doors and windows are peeled and deformed, the characteristics of the wood itself change, and the redo must be removed. If the material is compact, the surface paint film is intact. We attach decorative panel to use in the second construction. Second, steel doors and windows, security windows, if the surface paint film peeling off, the main body is rusted or cracked, must also take the corresponding measures to transform. Generally speaking, due to the long time, it is difficult to express the natural texture of wood by using varnish, so it is necessary to use solid wood lacquer at this time, so that it can not only cover the old lacquer surface, but also give different according to the new decoration style. The color achieves the magical effect of decaying.
Concerned about surprises
Label: How to choose suitable building materials for second-hand house decoration design
Previous: Small coatings companies are more likely to survive under uncertainty. Next: What you must know before using tiles
Aluminium Cell Steel Bar Carbon Paste
Aluminium Cell Steel Bar Carbon Paste,Steel Bar Carbon Paste,Graphite Ramming Paste For Aluminium Cell,Anthracite Based Cold Ramming Paste
Pingluo Zhongxing Carbon Co.,Ltd , https://www.ztecarbon.com