How to choose the right drawer slide?


Today, every household has drawers. Although the drawer slides are just a small piece of furniture hardware, if you do not choose the right drawer slides during daily use, it is easy to drop drawers.

Before choosing a drawer slide, we need to familiarize ourselves with what specifications it has.

As a guide rail fixed on a certain track for the movement of other movable parts of the drawer and with grooves or curves, the dimensions of the drawer slides are generally 10 inches, 12 inches, 14 inches, 16 inches, 18 inches, 20 inches, 22 inches, 24 inches. You can install different sizes of slide rails according to the size of the respective drawer model.

According to the length of the drawer slide rail, it can be divided into slide rails of lengths of 27 cm, 36 cm, 45 cm, and the like.

According to the material of the drawer slide, the commonly used drawer slides have roller slides, steel ball slides and wear-resistant nylon slides.

The structure of the roller slide rail is relatively simple. It consists of one pulley and two rails. It can cope with the daily push and pull needs, but the bearing capacity is poor and does not have the rebound function.

The steel ball slide is basically a three-section metal slide rail. The more common one is the structure mounted on the side of the drawer, which is simple to install and saves space. Good quality steel ball slides ensure smooth sliding and high load capacity.

The most reliable test is the wear-resistant nylon slide rails. Nylon is relatively rare on the market, and there are many slide rails with some nylon. Nylon drawer slides ensure that the cabinet drawers are smooth and quiet when pulled out, and the rebound is soft. The nylon slides ensure that the cabinet drawers are smooth and quiet when pulled out, and the rebound is soft. When purchasing, please look for the extension hardware, beautiful appearance and quality assurance.

The size of the drawer slide is determined by the size of the drawer. If the size of the drawer slide is not determined according to the size of the drawer, it is easy to make mistakes. Therefore, when choosing to purchase drawer slides, we must choose the right size.



This article is from Tuochen Hardware, thank you for reading. If you need to reprint, please indicate the source!

Http://news.chinawj.com.cn

Heavily Hot-Dip Galvanized Wire

Heavily Hot dipped Galvanized Wire

Zinc: 200-350g/m2

T/S: 380-500Mpa

Packing: plastic film inside, hessian woven bag or nylon woven outside

Shen Zhou City Hongda Hardware Products Co.,Ltd is a family owned company, founded in 1998, loacated at Tang feng industry zone, Shen Zhou. It has covered an area of 20 hectares, with a total asset of 20 million and more than 300 people with 80 engineering technicians, a 5-person research group, and a service group dedicated to provide the best solutions.

Heavily Hot-Dip Galvanized Wire,Heavily Galvanized Wire,Heavily Hot Dipped Wire,Woven Mesh Gabions

Shenzhou City Hongda Hardware Products Co.,Ltd , https://www.hdgabion.com

This entry was posted in on