Such as driving (crane, crane) remote control, some workshops more than a dozen units, a remote control remote control can completely cover all the traffic, why they do not interfere with each other at the same time?
I think the frequency should be different by replacing the internal crystal, but I want to know the exact answer.
Answer: The code is just the address code of the remote controller. The more bits the address code has, the lower the probability of error occurs. If you need to use more than one station in the same workshop, just avoid the frequency between different remote controllers. I would like to know how to use a few remote controls at the same time in the workshop. How do you not interfere with each other?
Such as driving (crane, crane) remote control, some workshops more than a dozen units, a remote control remote control can completely cover all the traffic, why they do not interfere with each other at the same time?
I think the frequency should be different by replacing the internal crystal, but I want to know the exact answer.
Answer: The code is just the address code of the remote controller. The more bits the address code has, the lower the probability of error occurs. If you need to use more than one station in the same workshop, just avoid the frequency between different remote controllers.
GF20/GF20CNC/GF25CNC Automatic Rebar Stirrup Bending Machine can bend round steel bar with diameter to various geometrics shape as required by construction.
Main Features Of Rebar stirrup bending machine
1. Convenient use: perfect safety performance, standard angle, fast speed, light and
handy.
2. Easy Operation: one man can operate it once switch on the power.
3. Convenient of range adjustment: for GF20 model, just need to shift induced magnet.
for GF20 CNC and GF25CNC model, just need to press the button on operation panel
4. We adopt two foot pedals: 90°and 135°, angle adjustment freely.
5. Fast Speed: rotate speed is 20-25 times/min (GF20), 25-30 times/min(GF25).
Main Technical Parameter
| Item | GF20 | GF20CNC | GF25CNC |
|
Voltage |
3-380V-50HZ or others |
3-380V-50HZ or others |
3-380V-50HZ or others |
|
Motor Model |
Y90L-4 |
Y90L-4 |
Y100L2-4 |
|
Motor Power |
2.2KW | 2.2KW | 3.0KW |
|
Motor Speed |
1440r/min | 1440r/min | 1440r/min |
|
Bending Common Carbon Steel |
Φ4 – Φ20 |
Φ4 – Φ20 |
Φ4 – Φ25 |
|
Bending Deformed Bar |
Φ5 – Φ16 |
Φ5 – Φ16 |
Φ5 – Φ20 |
|
Weight(kg) |
92±5 |
92±5 |
92±5 |
|
Dimension (mm)(L*W*H) |
800×520×820 |
800×520×820 |
800×520×820 |
Rebar Stirrup Bending Machine
Automation Rebar Stirrup Bending Machine,Hand Operated Rebar Bending Machine,Construction Material Rebar Bending Machine,Used Hydraulic Rebar Bending Machine
BAODING JINDI MACHINERY CO., LTD , https://www.rebarconnector.com