Introduction to sampling method of iron ore pellet pressure testing machine

Jinan Wanjia specializes in the production of iron ore pellet pressure testing machine, door type.
China Hardware Business Network



Jinan Wanjia professional production testing machine, manhole pressure testing machine, water pressure testing machine in drainage pipe and other testing equipment



Manager Ma


Sampling test operation:

Place a sample (single ball) at the center of the lower platen and apply the load at a constant speed (select a speed between 10 and 20 mm/min, 15 ± 1 mm/min is recommended) throughout the test. The pressure load is applied to a single pellet at a specified constant platen speed until the pellet is completely broken.

Iron ore pellet pressure tester test reference standard:
GB/T 14201-1993 "Method for determination of compressive strength of iron ore pellets"
International Standard ISO "Determination of Compressive Strength of Iron Ore Pellets"
ISO3081-1986 "Sampling of stone samples - manual method"
ISO 3083-1986 "Preparation of iron ore samples - manual method"
Iron ore pellet pressure testing machine technical parameters:
Host form: Door type maximum test force: 20KN
Test force measurement range: 2%-100% of full scale
Test force resolution: 0.01KN
Test machine level: 1 level force value accuracy: better than ±1% or ±0.5% of the indicated value
Displacement resolution: 0.01mm
Displacement measurement accuracy: better than ±0.5% of the indication
Test space: 600mm (can be customized)
Platen diameter: 150mm
Speed ​​range: 1-300mm/min



Http://news.chinawj.com.cn Introduction to sampling method of iron ore pellet pressure testing machine Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn Introduction to sampling method of iron ore pellet pressure testing machine

Table Lamps

GUANGDONG LAVIUS LIGHTING CO., LTD. , https://www.laviuslighting.com

This entry was posted in on