1. Hu Jintao, Wu Bangguo, Wen Jiabao and other party and state leaders inspected industry enterprises On June 27, 2009, when General Secretary of the CPC Central Committee and President Hu Jintao inspected the Harbin Group, he pointed out that he should actively respond to the impact of the international financial crisis and strive to do a good job. Keep growth, protect people's livelihood, and ensure stability. Enterprises must seize the opportunity, turn crisis into opportunity, work hard to develop internal strength, focus on tackling key problems, develop independent technology, and at the same time strengthen the introduction, digestion, absorption and innovation, strive to master more core and key technologies, enhance the competitiveness of enterprises, and do a good job. Technical reserves will lay the foundation for better development in the future.
Wu Bangguo, Wen Jiabao, Jia Qinglin, Li Changchun and other party and state leaders and leaders of various provinces and municipalities are very concerned about the development of China's machine tool industry. In 2009, they also visited the company and inspected the development of the industry.
2. Zhang Dejiang and other leaders came to CIMT2009
Under the economic situation that the world machine tool industry has been affected by the global financial crisis, CIMT2009 organized by China Machine Tool Industry Association has achieved unprecedented success. More than 1,200 well-known machine tool manufacturers from 28 countries and regions around the world exhibited more than 1,200 high-level mainframes, large-scale instruments and tens of thousands of machine tool accessories. Among them, there are more than 650 domestic exhibitors and more than 550 overseas exhibitors. The exhibition area is 100,000 square meters and the audience is more than 260,000 person-times, which has set the highest history of CIMT exhibition.
At this exhibition, the domestic exhibits based on independent innovation attracted attention, and the number of high-end CNC machine tools exhibited a new high. The domestic large-scale and heavy-duty CNC machine tools shined. The effect of the exhibition made the exhibitors satisfied and the trade in the exhibition was active.
On April 10, 2009, Vice Premier Zhang Dejiang and relevant ministries and commissions visited CIMT2009 to in-depth study and understand the current development level of the world's equipment manufacturing industry and the progress of China's machine tool industry, and to promote the technological progress of the industry in China Machine Tool Industry Association. The work and achievements in product structure adjustment and independent innovation have been fully affirmed.
3. 194 projects for major science and technology projects started on December 24, 2008, the State Council executive meeting reviewed and approved in principle the “High-end CNC Machine Tool and Basic Manufacturing Equipment Science and Technology Major Special Implementation Planâ€, the Ministry of Science and Technology, the Development and Reform Commission, and the Ministry of Finance On January 25, 2009, it was officially approved, and the CNC machine tool entered the implementation stage.
By the end of March 2009, the Ministry of Industry and Information Technology had issued a priority launch (directed release) and two batches of publicly announced project application guidelines, a total of 194 projects, and launched a special implementation work. After the three batches of research projects are completed, the entire research content of the CNC machine tool project in 2009 will be completed. The total planned investment is about 7 billion yuan. The project will be completed at the end of the “Eleventh Five-Year Plan†and the estimated sales revenue will be over 20 billion yuan. To meet the key needs of the four major fields of aerospace, shipbuilding, power generation equipment, and automobiles, and promote industrial restructuring and industrial upgrading of the equipment manufacturing industry.
4. The machine tool industry initially withstood the financial crisis and tempered the financial crisis. The machine tool industry accelerated the pace of transforming the development mode. The industrial structure of the industry and the adjustment of the product structure of the enterprise have achieved initial results. Some enterprises carry out product upgrading and upgrading, focus on the development of medium and high-end products; some change the production mode to achieve flexible and large-scale production; some increase the intensity of technological transformation, through self-equipment to improve manufacturing capacity; some strengthen management, reduce Cost, etc. In short, through the efforts of enterprises in the whole industry, in 2009, in the case of the general decline of the world machine tool industry, China's machine tool industry maintained a good momentum of positive growth.
5. China became the world's largest machine tool manufacturing country for the first time due to the financial crisis. In 2009, the global machine tool industry fell into recession. Except for China, machine tool production and consumption in the world's major machine tool producing countries/regions fell by 30% to 50%. %. In the whole year of 2009, the output value of China's machine tool industry is expected to increase by more than 10% year-on-year. After maintaining the world's largest consumer power for eight consecutive years, it is the world's largest producer for the first time. Of course, we must be soberly aware that the situation of China's machine tool industry is still not fundamentally changed.
6. Breakthrough progress in major new product development The machine tool industry actively responded to the impact of the global financial crisis, focused on improving the ability of independent innovation, and accelerated the pace of product structure adjustment. Some major new product developments serving key projects have made breakthroughs. Such as large width CNC super heavy gantry boring and milling machine, large diameter CNC heavy vertical milling lathe, large CNC crankshaft grinder, large width CNC bridge moving beam gantry milling machine, super heavy duty CNC floor milling boring machine, large CNC gear processing machine, precision high speed lie Machining center, high-performance CNC forging equipment, laser processing machine tools, gears and tool measuring instruments. Through the development of new products, the industry has improved its ability to fight the crisis and meet the needs of some major projects in the country.
7. China's CNC machine tool industry development policy research project completed The project of “CNC machine tool industry development policy research†undertaken by the Ministry of Industry and Information Technology and undertaken by China Machine Tool Industry Association was completed. The project report comprehensively analyzed the development environment of the machine tool industry, market demand, policy support of industrial developed countries to the CNC machine tool industry, and related policies in China, and proposed policy recommendations to support the development of the CNC machine tool industry, and developed CNC machine tools for the country. The industrial development policy provides the basic materials.
8. The preparation of the “12th Five-Year†development plan for China's machine tool industry started. According to the requirements of the National Development and Reform Commission, the Ministry of Industry and Information Technology and other relevant ministries, the China Machine Tool Industry Association is conducting a comprehensive survey on the status quo of China's machine tool industry and the development level of domestic and foreign industries. On the basis of the needs of the user industry, the “Twelfth Five-Year†development plan of the industry was launched, and opinions and suggestions from all aspects of the industry were sought to propose planning objectives. The “Twelfth Five-Year Plan†of various sub-sectors of the machine tool industry has also started, and the backbone enterprises of the industry have begun to plan corresponding development plans under the guidance of local governments.
9. New Leadership Election of Machine Tool Association On July 9, 2009, the 6th Member Congress of China Machine Tool Industry Association and the 6th Council were held in Beijing. In the spirit of extensive participation, encouragement of innovation, and promotion of development, the conference elected a new council and standing council, deputy director, executive director, executive vice president and rotating chairman, and gradually established the backbone of the industry. The company is the core board of directors.
In order to better maintain the relationship between the permanent establishment of the association and the council, play the role of the council of the association, and facilitate external relations, the leading body of the permanent establishment of the association is composed of executive vice president, executive vice president, secretary general and deputy secretary general.
10. The financial crisis has had a serious impact on China's machine tool industry. Due to the financial crisis, the international machine tool market continued to slump in 2009, and the consumer markets of the world's major machine tool producing countries fell sharply. China's export of machine tool tools has declined in depth. The export value in 2009 is estimated to be about 4.6 billion US dollars. Compared with the 7.1 billion US dollars in 2008, the decline is 35%, which is the lowest in 10 years. With the increasing international trade protectionism, industry enterprises should actively explore new markets and adjust the export structure of products in order to expand the export of machine tool products.
The blind plate is mainly used to completely isolate the production medium and prevent the production from being affected or even causing accidents due to the loose closing of the shut-off valve
Blind Flange Flat Face,Blind Flange Raised Face,Jis B2220 Flange,Gost Flange
Jinan Xintai Forging Co., Ltd , https://www.xtdzflange.com