Everyone knows that waterproof work in toilets is one of the most important projects. Waterproof work does not bring a lot of trouble to future life. Therefore, waterproof work must be done well when renovating toilets. So how can the toilet waterproof work be done? What are the waterproof materials? Let's take a look with Xiao Bian!
How to make toilet waterproof
1, grassroots processing, cleaning
Before doing waterproofing, check the water and circuit of the restroom and have a detailed understanding of them. After the plan is confirmed, the hydropower heating pipeline should be laid flat. The original decoration material is cleaned, then laid with cement slurry, and then treated with water.
2, brush the first time waterproof coating
Before brushing the waterproof coating, ensure that the site is clean and dry. The entire floor of the bathroom should be painted completely, with no omissions. Combine with the grassroots layer to be firm, no cracks, no bubbles, and no shedding. The brushing height must be consistent and the thickness must meet the product requirements.
3, brush the second time waterproof coating
The second pass of the waterproof coating requires a certain interval of time, and the second pass of the coating must wait until the first coat of paint has dried out. The specific time may depend on the coating. The brushing interval is too short and the waterproof effect will be poor.
4, shop protection layer
After the waterproof coating is applied, apply a protective layer covering the waterproof layer completely to prevent the subsequent construction from damaging the waterproof layer.
5, closed water test
The water line should not be less than 2 cm in the closed water test. In the 24 hours of the experiment, there was no leakage and the representative quality was acceptable. If there is leakage, it must be redone and cannot be ignored.
What are the waterproof materials
1, cement mortar waterproof material
Cement mortar waterproof material is a common paint for toilets. It should be used in proportion to cement mortar. It must be well-mixed until it has no powder and no precipitate. The good material should be used within 2-3 hours.
2, polymer polymer waterproof material
The polymer polymer waterproof material is synthesized from a variety of aqueous polymers and has the advantages of convenient construction, low cost, cost saving and environmental protection. 
3, acrylic bathroom waterproof material
The advantage of acrylic waterproof coating is that after coating, the coating will form a conjunctiva, with strong elasticity and extensibility, and the toilet is suitable for use. Wet and other places can also be used for construction, high bonding strength, solid combination with the grass-roots and outer protection decoration layer, no pollution, no smell, green and environmental protection.
Xiao Bian summary: The above is about how well the bathroom waterproof and waterproof materials are related to the content, I hope everyone can do strict treatment when doing toilet waterproof work, so as to avoid unnecessary trouble in the future. I hope the above content will help everyone.
Bathroom waterproof material waterproof material toilet waterproof
SUN YAT INDUSTRY LIMITED , https://www.ernte-eu.com