There are many specifications for the aluminum buckle plate, including the panel width, thickness, hemming height and so on. The selection should be based on the characteristics of the home bathroom. Aluminum buckle plate is divided into two kinds of surface punching and plane. The surface punching can breathe sound and sound, and the interior of the buckle plate is covered with a layer of film cushion, and the moisture can be absorbed by the film through the punching hole, so it is most suitable for the kitchen with more moisture. The 600mm×600mm micro-hole square plate, F297H30 strip plate and M185H20 aluminum buckle plate are widely used in the market.
The quality of aluminum gussets is not entirely thin and thick. The key lies in the texture of aluminum. The aluminum gussets used in general engineering are 0.8 millimeters or even thicker. Why? Because some engineering gussets are very long, in order to prevent deformation, they must be thicker and harder. On the contrary, aluminum buckles for home improvement are rarely more than 4 meters, and there is no heavy weight on the aluminum buckle ceilings. Therefore, 0.6 mm of aluminum buckles for home improvement are sufficient.
If the aluminum buckle you are consulting is brand name, most of them are 0.6mm in terms of mid-range.
Regarding why some brands are 0.8 mm but not good: some miscellaneous brands, can use aluminum cans, because of the quality of aluminum itself, so they want to make the aluminum buckle is very thin but not possible, because Aluminium is not good, and there is no way to make the board stretch thin, so they can only do it in thick.
To identify the aluminum pinch, in addition to paying attention to the surface finish, we must also observe whether the board is thin and even, and if we feel it by hand, we can see if the elasticity and toughness are good.
The quality of aluminum gussets is not entirely thin and thick. The key lies in the texture of aluminum. The aluminum gussets used in general engineering are 0.8 millimeters or even thicker. Why? Because some engineering gussets are very long, in order to prevent deformation, they must be thicker and harder. On the contrary, aluminum buckles for home improvement are rarely more than 4 meters, and there is no heavy weight on the aluminum buckle ceilings. Therefore, 0.6 mm of aluminum buckles for home improvement are sufficient.
If the aluminum buckle you are consulting is brand name, most of them are 0.6mm in terms of mid-range.
Regarding why some brands are 0.8 mm but not good: some miscellaneous brands, can use aluminum cans, because of the quality of aluminum itself, so they want to make the aluminum buckle is very thin but not possible, because Aluminium is not good, and there is no way to make the board stretch thin, so they can only do it in thick.
To identify the aluminum pinch, in addition to paying attention to the surface finish, we must also observe whether the board is thin and even, and if we feel it by hand, we can see if the elasticity and toughness are good.
Aisle ceiling living room ceiling home improvement kitchen ceiling bathroom ceiling
Go Karts For Sale,Racing Go Karts,Go Karting
Lizhong Industry Co., Ltd. , http://www.nbgrounddrill.com