Latex paint characteristics

Jc001.load('iframe') JIFrame.create({ 'url' : '/go.php?action=ads&iframeHeight=250&isIframe=1&key=%CD%BF%C1%CF&pos_id=jc001_news_detail_30&reqkey=1&style=margin%3A15px+15px+ 25px+0%3B+height%3A255px%3Bwidth%3A255px%3B+float%3Aleft%3B', 'height' : 250 })

(1) Drying speed is fast. At 25 ° C, the surface can be dried in 30 minutes and completely dried in about 120 minutes.

(2) Good alkali resistance. It is applied to the new plastered wall and the ceiling and concrete wall which are alkaline, and it is not sticky and is not easy to change color.

(3) The color is soft, the paint film is hard, the surface is smooth and dull, the look is comfortable, and the color is bright and soft. It has strong color adhesion and is an ideal coating for painting walls and ceilings.

(4) It can be applied on the newly constructed wet wall surface, allowing the humidity to reach 8-10%, and does not affect the cement to continue to dry.

(5) Non-toxic. Even in the construction of a poorly ventilated room, it will not cause harm to construction workers.

(6) Easy to prepare and easy to construct. It can be diluted with water, and it can be constructed with a brush or a pen. After the tool is used up, it can be cleaned with water, which is very convenient.

(7) Do not ignite. Since the coating is an aqueous phase system, there is no risk of fire.

How to calculate the amount of latex paint

The room area (m2) divided by 4, the height of the painted wall (decimeter) divided by 4, the quotient of the two is the number of kilograms of latex paint required.

Example: A room with an area of ​​20 square meters and a wall height of 16 decimeters, then (20÷4)+(16÷4)=9, ie 9 kg can be painted twice.

King Nipples and Hose Menders are kinds of Pipe Fittings, it's cutted by pipes and make different sizes.King nipple one side with male threads and and connect with pipe

system, another side raised by machine, so that can connect with plastic hose. Hose Mender raised both side so that can connetor with plastic hose.

Material: Carbon steel

Surface: Electric galvanized

Standard: BS,ANSI, or as demand

Size: From 1/8" to 6"

Application: Rubber/Plastic hose connection for waters, gas, oil, etc.

King Nipple  (1)


Hose mender

Hose Mender and King Nipples

Hose Mender,Steel Hose Mender,Galvanized King Nipple,Steel Combination Nipples

HEBEI ZIFENG NEW ENERGY TECHNOLOGY CO.,LTD. , http://www.zifengpipeline.com

This entry was posted in on