The messy work environment and complicated work flow at the renovation site are often described by the consumers who are decorating as a "terrorist journey." In fact, aside from these complicated renovation procedures, the safety issues at the construction site are the most important ones.
Recently, safety accidents due to cluttered materials, untimely collection of tools, and lack of safety protection measures for high-altitude operations have become commonplace. Major decoration companies, consumers, and even guerrillas whose systems are not yet perfect must ensure that safety issues are at the top of the list. Whether they are on-site at the decoration site or due to design or construction failures, the safety hazards caused to the home owners should Timely and effective avoidance.
>>> Links: vigilant construction tidiness cut off the three major "resources"
1. Miscellaneous objects in the floor - easy to hurt the body
The presence of obsolete materials, exhausted tools, and electric wires, etc., at the scene of the renovation site seem to be only the result of laziness and irregularity. However, once an accident occurs, it will bring us an eternal regret. For example: glass, ceramic chips, broken bricks, nails, screws and other materials, although not large nor heavy, but it can be easily worn through the soles of the shoes, injuring the soles of the feet; used up unused pliers, screwdrivers, chisels or chainsaws If you accidentally fall to the ground, you may stab your body if you step on it or touch it when you come down from a height.
2. Air operations - life threatening without protection
The state stipulates that any work performed at a location of 2 meters and over 2 meters is considered as high altitude operations. Work at heights must be erected with scaffolding, belts or other measures to prevent falling. When working on dangerous edges such as roofs and steep slopes, safety nets or protective railings should be installed on the side of the airside and seat belts should be used. Looking closely, these standards also apply to home renovations, especially when ceilings or villas are decorated in high ceilings. Therefore, Zhang Zhigang reminds construction workers, first, that any work that can be done in advance on the ground should be done on the ground as much as possible to minimize working time at high heights; secondly, all kinds of protective measures must be done well, rather Ningdo No less, mainly life safety.
3. Air pollution - the greatest damage to construction workers
The long-term work on the construction site full of paint, board, marble, or ceramic materials is ultimately surrounded by various harmful substances, pollutants, and radioactive materials. Although these pollutions are invisible and invisible, they pose a great danger to the human body, but they cause discomfort to the body and danger to life when they are heavy. Therefore, it is recommended that the personnel involved in the construction work should use strict closed treatment after exhausting these materials and properly open windows for ventilation to minimize the damage.
4. Fire hazards - potential lurking anywhere
In addition to the quality of decoration, the awareness of fire prevention during construction is also very important. In this regard, Zhang Zhigang put forward five major fire precautions in the decoration process.
The paint is placed alone and thrown away. At the construction site, paint is always the most dangerous combustible. Barrels of paint, even buckets that had been painted, were all met with fire. Therefore, all paints should be placed together in a single place, near the window, or on the balcony; paint buckets that are not used or temporarily not used should be sealed in time to avoid touching the open flame; ignition of abandoned paint buckets should be timely Deal with it so that it will be used up, leaving no hidden dangers.
Construction workers are prohibited from using electric stoves and heat faster. During the construction process, it is best not to lose money for natural gas in your home to prevent workers from cooking. However, the use of simple electric appliances such as electric stoves, fast heat, and electric dumplings is strictly forbidden. Otherwise, once workers forget to switch off, the consequences will be unthinkable. In addition, it is recommended that formal decoration companies provide workers with more formal appliances such as drinking fountains and electric kettles.
No open fire is allowed on the construction site. All decoration companies have stipulated that no open fire can occur on the construction site and heavy penalties will be imposed upon discovery. Consumers should also pay attention to this point. Do not smoke when supervising the construction site. In addition, try to choose a regular decoration company, some rules guerrillas can not be guaranteed.
Equipped with fire fighting equipment. Relevant departments require that the construction site must be equipped with appropriate fire-fighting equipment in case of emergency. Consumers can check this point at any time.
Do not connect more than 100 watt bulbs during construction. During the renovation period, the lamps left at home can withstand a maximum of 100 watts, but due to the need for a bright working environment during construction, some workers will privately connect 100 watt or more bulbs to the lamp. As a result, there is a possibility that the current will not be able to load because of the current. If this happens, consumers are required to request the construction unit to replace porcelain lamps that can withstand higher currents to avoid danger.
Experience lacquer electrical appliances window glass home decoration decoration decoration company okay glass brick glass door villa door
Molybdenum has outstanding electrical , heat-conducting capabilities and relatively high tensile strength. Molybdenum has been useful in the nuclear, chemical, glass, sapphire growth furnace and metallizing industries, service temperatures. For molybdenum alloys in structural applications arc, is limited to a maximum of about 1650'C (3000'F). Pure molybdenum has good resistance to hydrochloric acid and is used for acid service in chemical process industries. We can supply nearly all kinds of pure molybdenum products, e.g. Molybdenum wires, Molybdenum bars, Molybdenum electrodes, Molybdenum plates, Molybdenum sheets, Molybdenum Foils, Molybdenum needles, Molybdenum boats, Molybdenum crucibles, Molybdenum disc, Molybdenum alloy TZM and so on.
Molybdenum
Molybdenum Bar,Molybdenum Tube,Molybdenum Plate,Molybdenum Wire
Baoji Shengyuan Metal Material Co., Ltd. , http://www.baojisymetal.com