Some factories may temporarily stop operation due to adjustment of production and air compressors. How to properly handle the air compressors that are shut down? The screw air compressors are shut down for a long time. According to the length of the downtime, the following methods should be strictly followed, especially In seasons or areas where the temperature is below 0 degrees and high humidity, more attention should be paid to the treatment.
The treatment method for screw air compressor to stop for more than 1 month:
1) Wrap the electrical equipment such as the controller and distribution box of the air compressor with plastic paper or oil paper to prevent gas intrusion;
2) When the air compressor is shut down, the water in the oil cooler and the aftercooler should be completely drained to prevent the cooler from being cracked and damaged under low temperature conditions;
3) If there is any fault before the air compressor stops, it should be repaired and placed again to avoid urgent use in the future;
4) After the air compressor is stopped for two or three days, the condensed water in the oil and gas drum, oil cooler and aftercooler is discharged;
The screw air compressor is shut down for more than 3 months. In addition to the above procedures, the following processing is required:
1) Close all openings of the air compressor to prevent moisture and dust from entering;
2) Replace the air compressor oil before decommissioning, and run for 30 minutes. After two or three days, remove the condensate from the air tank and oil cooler;
3) completely discharge the condensate;
4) Place the air compressor in a place with less dust and dry air.
Concerned about surprises
Label: Treatment method for screw air compressor to stop for more than 1 month
Previous: The reason and solution for the temperature drop of the high temperature box Next: The six working principles of the solenoid valve manufacturer to get the daily dimension
Molded Graphite,Large Graphite Block,Molded Graphite Block,Carbon Graphite Block
Henan Carbons New Material Technology Co., Ltd. , https://www.hncarbons.com