• Model NO.: 0.8mm
• Cross Sectional Shape: Round
• Type: Loop Tie Wire
• Metal Wire Drawing: Hot Drawing
• Thickness: Metal Thick Wire
• Diameter: 0.8mm/21gauge
• Sample: Free
• Suit: Max Rb395/392/217, Et
• Original: China
• Suit Max Rebar Tiers: Rb395/397/217/215/212, etc.
• Transport Package: 50coils/Carton, 50cartons/Pallet
• Origin: China

• Material: Stainless Steel Wire
• Application: Gabion Mesh, Building Market, Floor Heat Mesh
• Surface Treatment: Electro Galvanized
• Status: Soft State
• Brand: Bld
• Length: 95m
• Model Quality: Tw897A
• Delivery: 1-3 Days After Deposit
• Model: Tw898
• Trademark: chunsheng
• Specification: 0.8mm, 1.57mm rebar tie wire
• HS Code: 84679910

New Tie Wire for MAX original Rebar Tying Machine (TW898 replace of TW897A)
Max TW898 Rebar Tie Wire Roll - 50 Pack
Rebar tying wire for the Max RB397, RB517 tying tools.
Approx. 120 ties per coil.
21 gauge, stainess steel wire.
50 pk. case.
 

Max TW898 Rebar Tie Wire for RB213, RB215, RB217 RB392, RB395, RB397, RB515, and RB517

Steel wire, 21 gauge, 312 feet per coil x 50 coils. Approx. 180-210 ties per coil for models RB213, RB215, RB217. Approx. 120 ties per coil for models RB392, RB395, RB397. Approx. 75-90 ties per coil for model RB515, RB517

Applications Include:
Precast concrete products, Building foundation, Road and bridge construction, Floors and walls, Radiant heating tubes, Retaining walls, Swimming pool walls, Electrical conduits.  China original Suppliers and Exporter of TW898/ TW897A /TW1525 tie wire,

Deep Hole Coated Drill

For deep hole drills, when drilling deep holes, it is necessary to discharge a large amount of chips from the hole and at the same time send a sufficient amount of coolant to the cutting edge of the tool. Generally, twist drills are difficult to meet this requirement. When drilling a deep hole with a larger diameter, an internally cooled twist drill can be used to input the coolant through the hole in the drill body under pressure or through a small tube placed in the groove on the drill body. To drill a particularly deep hole, a special internally cooled deep hole drill bit must be used for forced input of coolant under high pressure while flushing out the chips appearing in the hole.

Deep Hole Coated Drill,Tungsten Carbide Coated,Twist Drills,Drill Long Bit

ROYI CNC TOOL TAIXING CITY CO.,LTD , https://www.royitools.com