First, the operating procedures for the woven bag cutting machine: 1. Connect the 220V power supply. Once plugged in, the power indicator light should turn red, confirming that the machine is receiving electricity. 2. Adjust the temperature of the heating wire based on the material and thickness of the plastic bags you are working with. Turn the temperature knob clockwise to increase the heat and counterclockwise to decrease it. The thicker the plastic bag, the higher the required temperature, so make sure to rotate the knob accordingly. 3. After the machine reaches the desired temperature, press the upper cover once to complete the shrinking process. This action activates the heating element and ensures proper sealing. 4. If the shrinkage effect is not satisfactory, check the power supply, the heating wire, and the high-temperature tape. If any issues are found, immediately inform a qualified technician for maintenance and avoid using the machine until it is fixed. 5. After finishing your work, turn the temperature knob counterclockwise to the lowest setting, then unplug the power cord. Make sure to disconnect the power supply completely before organizing or storing the machine. Second, important safety and operation notes: 1. Always keep your hands away from the area between the upper cover and the heating wire while the machine is in operation. This is a critical safety measure to prevent burns or injuries. 2. When adjusting the temperature, apply gentle pressure and avoid forcing the knob. Before turning off the machine, always return the temperature knob to the minimum position to ensure safe shutdown. 3. Regularly inspect the machine for wear and tear, especially the heating elements and electrical connections. Keep the workspace clean and free of debris to prevent accidents. 4. Only trained personnel should operate or maintain the machine. If you are unsure about any part of the process, consult a supervisor or technician before proceeding. 5. Store the machine in a dry, well-ventilated area when not in use. Avoid exposing it to moisture or extreme temperatures, which can damage internal components. By following these guidelines, you can ensure safe and efficient operation of the woven bag cutting machine while minimizing the risk of injury or equipment failure. Always prioritize safety and proper handling when using industrial tools.
A manual Hydraulic Pump is a device used to generate hydraulic pressure manually. It is typically used in applications where a power source is not available or where precise control of pressure is required.
The pump consists of a handle or lever that is manually operated by the user. When the lever is moved, it activates a piston or plunger inside the pump, which pressurizes the hydraulic fluid. The pressurized fluid is then directed to the hydraulic system through a series of valves and hoses.
There are different types of manual hydraulic pumps, including hand pumps, foot pumps, and air-powered pumps. Hand pumps are the most common type and are operated by hand-cranking a lever or rotating a handle. Foot pumps are operated by stepping on a pedal or lever with the foot. Air-powered pumps use compressed air to generate hydraulic pressure and are often used in industrial applications.
Manual hydraulic pumps are commonly used in a variety of industries, including automotive, construction, and manufacturing. They are used to power hydraulic tools, lift heavy objects, and operate hydraulic machinery. They are also used in hydraulic testing and calibration applications, where precise control of pressure is required.
Overall, a manual hydraulic pump is a versatile and reliable tool that allows for the generation of hydraulic pressure without the need for an external power source.
Manual Hydraulic Pump,Manual Hydraulic Hand Pump,Hand Operated Hydraulic Pump,High Pressure Hydraulic Manual Pump
Yantai Dongyue Hydraulic Technology Co., Ltd , https://www.deeleap.com