Shoe cabinet maintenance and cleaning simple knowledge

Jc001.load('iframe') JIFrame.create({ 'url' : '/go.php?action=ads&iframeHeight=250&isIframe=1&key=%BC%D2%BE%DF&pos_id=jc001_news_detail_30&reqkey=1&style=margin%3A15px+15px+ 25px+0%3B+height%3A255px%3Bwidth%3A255px%3B+float%3Aleft%3B', 'height' : 250 })

Shoe cabinets are actually the most dangerous dirty corners, and they are also prone to dust, so here we will introduce the maintenance and cleaning of the shoe cabinet.

Shoe care

1. Use a clean soft cloth, often wipe the surface of the shoe cabinet, do not use ordinary water, wet cloth, hard cloth to wipe the surface, mirror and glass. Avoid contact with acids, bases, and oils. When conditions permit, use high-purity industrial alcohol to wipe the board surface.

2. It is not possible to hit the surface of the shoe cabinet with hard objects such as hammers, and it is even more difficult to use the knife to cut and cut on the board surface. If it is found that the panel has a partial slit, it should be repaired in time. Otherwise, the crack will open up and even appear curved for a long time, resulting in complete damage.

3. Use a special cleaning agent to clean the stains on the mirror or glass surface of the shoe.

Shoe cabinet cleaning

1. Regularly maintain the shoe cabinet. Generally, it can be carefully maintained once a quarter. After wiping the surface dust of the furniture with a soft cloth, the furniture surface is evenly coated with light wax. Light wax protects the furniture paint film from moisture, scratches and burns.

2. For stains that have been left for too long or difficult to remove, use a cotton cloth with a small amount of gasoline or alcohol to remove them. Then use a piece of cotton cloth to spread the appropriate amount of glazing wax and then wipe the wax evenly with a piece of dry cloth to avoid wax marks. Then treat the area where the paint layer has been damaged.

3. The part that is scorched by cigarettes, such as only the surface paint layer, can be lightly rubbed off the stain with fine water sandpaper, and then waxed.

4, the surface is scratched and not deep and wood, glazing wax can be used for local direct polishing, sandpaper should be used for deeper scratches.

5, if the damage has been deep into the wood, it should be polished and repainted to make the furniture surface bright and lasting, moisture-proof.

6, furniture hardware accessories metal handle can also be glazed with glazing wax and wipe, so that it is flexible to rotate and rust and anti-oxidation.

Others Garden Tools

Picking Machine,Harvesting Machine,Gasoline Tea Picking Machine

Fenghua Jade Motor Co., Ltd. , http://www.goselectric.com

This entry was posted in on