 I engaged in feed particle machine, farm machinery and farmers and feedlots special equipment. City Bureau of Animal Husbandry is designated to promote the excellent mechanical, but also the majority of farmers receive substantial economic benefits the most dependent, the best equipment money. Below Introduce the use and maintenance of the feed pellet machine :
　　 1. Before using the machine , the machine should be thoroughly cleaned and inspected , the belt tension should be adjusted , and then the power supply should be connected , and the direction should be rotated .
　　 2. Adjust the " pressing screw " of the pressure roller to 0.1-0.3 mm between the pressure roller and the template .
　　 3, when taking the test machine 15 kg powder (calculated according to type 200C, 5 kg and less small, large multi 5 kg), preferably with rice polishings, 5 pounds of meat or peanut Jiamai Pi 15 kg pressure test, repeated rolling after pressing for 15 minutes, not the pressure, the feed hole template with a vise clamp nails (not with a pointed nail, the nail heads preferably polished) open, and then compressed until the normal discharge. If the user's own formula feed can't be pressed out , then the feed material of the mold hole is opened , the food oil is put on the flat mold surface , and then the above-mentioned rice husk or peanut meat and wheat husk feed are pressed out, and then the fine sand is added. (building sand) repeatedly pressing for 10 minutes until the normal discharge.
　　 4 , the length of the pellet feed can adjust the upper and lower position of the cutting knife .
　　 5, the template can be removed if replacement cartridge filled hopper is removed, remove the pressure wheel and cutter, gongs twist off the cap on the spindle, with attachment "chest" hanging out flat die, (templates can be used double-sided, generally After processing 50,000 jin, use it to turn over, and use 105A type 25,000 jin to turn over ).
　　 6, for safety, when the cover is removed, must be off the power switch to turn off the machine, hand and other tools to the contact pressure wheel template.
　　 7. When the machine is rolled to 20,000 kg of decompression wheel for cleaning and maintenance of copper lubricant , a comprehensive maintenance and refueling is carried out every six months .
　　 8 , 105A single-phase motor , please ensure 220V voltage .
　　 9. Install the grounding device with the pole of the motor .
　　 10. For models that use electric motors , customers must install overload protection devices .
In the company: rather bear the loss, do not want to lose credibility, adhere to the "full service, the reputation of Germany a hundred years," the service concept, the present and look to the future, willing to work with customers and friends at home and abroad go hand in hand, create a better future.
---
**Feed Pellet Machine: Usage and Maintenance Guide**
As a professional in agricultural machinery, I have extensive experience working with feed pellet machines, farm equipment, and specialized tools used in livestock farming. The City Bureau of Animal Husbandry plays a key role in promoting high-quality mechanical solutions, which have brought significant economic benefits to farmers. These machines are often the most cost-effective and efficient tools available.
Here’s a detailed guide on how to properly use and maintain your feed pellet machine:
1. **Preparation Before Use**
Before starting the machine, make sure to clean and inspect it thoroughly. Check the belt tension and adjust it as needed. Then, connect the power supply and test the rotation direction to ensure everything is functioning correctly.
2. **Adjust the Pressing Screw**
Adjust the gap between the pressing screw and the die plate to approximately 0.1–0.3 mm. This ensures optimal performance and prevents damage to the machine during operation.
3. **Testing the Machine**
Start by testing the machine with 15 kg of powder (depending on the model type—e.g., 200C). It's recommended to use materials like rice husks, meat scraps, or peanut shells. If the feed doesn't come out easily, open the mold holes with a vise clamp and apply some vegetable oil to the die surface. Then press the mixture repeatedly until the pellets start to discharge normally. If your custom feed isn’t working, try mixing in fine sand (like building sand) and press again after 10 minutes.
4. **Adjusting Pellet Length**
The length of the final pellets can be adjusted by changing the position of the cutting knife. This allows you to customize the size according to your needs.
5. **Replacing the Die**
If you need to replace the die, first remove the hopper, pressure roller, and cutter. Loosen the spindle cap and use the provided "chest" tool to remove the flat die. Note that dies can often be used on both sides. Typically, after processing about 50,000 kg of feed, it's time to flip the die. For certain models like 105A, this happens after around 25,000 kg.
6. **Safety Precautions**
Always turn off the power before removing any covers. Avoid touching the pressure roller or die while the machine is running. Use caution and keep hands away from moving parts.
7. **Maintenance Schedule**
After the machine has processed 20,000 kg of feed, perform a thorough cleaning and lubrication. It's recommended to conduct a full maintenance check and refuel the machine every six months to ensure long-term performance.
8. **Voltage Requirements**
For models like the 105A single-phase motor, ensure that the voltage is stable at 220V.
9. **Grounding Installation**
Install a proper grounding device on the motor to prevent electrical hazards and ensure safe operation.
10. **Overload Protection**
For all electric motor-driven models, it's essential to install an overload protection device to safeguard against potential electrical failures.
At our company, we believe in delivering quality service and maintaining long-term trust. We adhere to the principle of "full service, lasting reputation," and we look forward to working with customers and partners worldwide to build a brighter future together.For the convenience of customers, our company provides pump accessories, such as pump pipe joints, pump heads, refill ink bottles, capsule filters, etc. We focus on every detail because we understand your needs better.
Our products are highly recognized by customers at home and abroad, and we have established long-term cooperative relations with them. Products are widely used in medicine, laboratories, environmental protection technology, gas analysis and other fields. Friends in need are welcome to consult.
PP pump pipe joint,Pump accessories,Pump head,Capsule filter,Peristaltic pump head
Changzhou Yuanwang Fluid Technology Co., Ltd. , https://www.ywfluid.com