Color steel tile machinery and equipment maintenance and maintenance:
1, in strict accordance with operating procedures for operation.
2, each time before starting the machine according to the requirements of timing, fixed-point, quantitative plus lubricants, oil should be clean without precipitation.
3, tile machine equipment must always be kept clean, unpainted part of anti-rust oil.
4. The lubricating oil in the motor bearing should be changed and filled regularly, and often check the electrical part is often safe and reliable.
5, regular inspection and repair switch, insurance, handle, to ensure its reliable operation.
6, 10 minutes before work every day, on the machine lubrication and scrub cleaning.
7. It is strictly forbidden for non-designated personnel to operate the equipment. Normally, it must be done so that people can stop the machine.
First, the filter
1. Each time the oil is changed, the filter should be replaced or thoroughly cleaned;
2. The air filter on the fuel tank is checked and cleaned every 3 months, preferably in 1 year.
3. If the oil quality of the color steel equipment is not clean, the filter will be abnormal and should be replaced;
Second, the hydraulic components 1. Clean the hydraulic components (substrate, valve, motor, pump, tubing, etc.) every month to prevent dirt from entering the system. Do not use cleaners.
2. After one month of use of the new machine, inspect whether there is any deformation in the bends of the tubing. If there is any abnormality, replace it. After using it for two months, fasten the joints of all accessories. When this work is done, the system should be shut down. Pressure three, hydraulic circuit
1. Check the oil level of the tank every week. If the hydraulic system is repaired, check the oil level. If the oil level is lower than the oil window, the hydraulic oil should be filled.
2. The system oil temperature should be between 35 °C ~ 60 °C, not more than 70 °C, such as high oil and accessories will lead to deterioration.
3. The hydraulic oil used in this color steel machinery is ISOHM46 or MOBILDTE25;
1, in strict accordance with operating procedures for operation.
2, each time before starting the machine according to the requirements of timing, fixed-point, quantitative plus lubricants, oil should be clean without precipitation.
3, tile machine equipment must always be kept clean, unpainted part of anti-rust oil.
4. The lubricating oil in the motor bearing should be changed and filled regularly, and often check the electrical part is often safe and reliable.
5, regular inspection and repair switch, insurance, handle, to ensure its reliable operation.
6, 10 minutes before work every day, on the machine lubrication and scrub cleaning.
7. It is strictly forbidden for non-designated personnel to operate the equipment. Normally, it must be done so that people can stop the machine.
First, the filter
1. Each time the oil is changed, the filter should be replaced or thoroughly cleaned;
2. The air filter on the fuel tank is checked and cleaned every 3 months, preferably in 1 year.
3. If the oil quality of the color steel equipment is not clean, the filter will be abnormal and should be replaced;
Second, the hydraulic components 1. Clean the hydraulic components (substrate, valve, motor, pump, tubing, etc.) every month to prevent dirt from entering the system. Do not use cleaners.
2. After one month of use of the new machine, inspect whether there is any deformation in the bends of the tubing. If there is any abnormality, replace it. After using it for two months, fasten the joints of all accessories. When this work is done, it should be turned off. Pressure three, hydraulic circuit
1. Check the oil level of the tank every week. If the hydraulic system is repaired, check the oil level. If the oil level is lower than the oil window, the hydraulic oil should be filled.
2. The system oil temperature should be between 35 °C ~ 60 °C, not more than 70 °C, such as high oil and accessories will lead to deterioration.
3. The hydraulic oil used in this color steel machinery is ISOHM46 or MOBILDTE25;
1, in strict accordance with operating procedures for operation.
2, each time before starting the machine according to the requirements of timing, fixed-point, quantitative plus lubricants, oil should be clean without precipitation.
3, tile machine equipment must always be kept clean, unpainted part of anti-rust oil.
4. The lubricating oil in the motor bearing should be changed and filled regularly, and often check the electrical part is often safe and reliable.
5, regular inspection and repair switch, insurance, handle, to ensure its reliable operation.
6, 10 minutes before work every day, on the machine lubrication and scrub cleaning.
7. It is strictly forbidden for non-designated personnel to operate the equipment. Normally, it must be done so that people can stop the machine.
First, the filter
1. Each time the oil is changed, the filter should be replaced or thoroughly cleaned;
2. The air filter on the fuel tank is checked and cleaned every 3 months, preferably in 1 year.
3. If the oil quality of the color steel equipment is not clean, the filter will be abnormal and should be replaced;
Second, the hydraulic components 1. Clean the hydraulic components (substrate, valve, motor, pump, tubing, etc.) every month to prevent dirt from entering the system. Do not use cleaners.
2. After one month of use of the new machine, inspect whether there is any deformation in the bends of the tubing. If there is any abnormality, replace it. After using it for two months, fasten the joints of all accessories. When this work is done, the system should be shut down. Pressure three, hydraulic circuit
1. Check the oil level of the tank every week. If the hydraulic system is repaired, check the oil level. If the oil level is lower than the oil window, the hydraulic oil should be filled.
2. The system oil temperature should be between 35 °C ~ 60 °C, not more than 70 °C, such as high oil and accessories will lead to deterioration.
3. The hydraulic oil used in this color steel machinery is ISOHM46 or MOBILDTE25;
1, in strict accordance with operating procedures for operation.
2, each time before starting the machine according to the requirements of timing, fixed-point, quantitative plus lubricants, oil should be clean without precipitation.
3, tile machine equipment must always be kept clean, unpainted part of anti-rust oil.
4. The lubricating oil in the motor bearing should be changed and filled regularly, and often check the electrical part is often safe and reliable.
5, regular inspection and repair switch, insurance, handle, to ensure its reliable operation.
6, 10 minutes before work every day, on the machine lubrication and scrub cleaning.
7. It is strictly forbidden for non-designated personnel to operate the equipment. Normally, it must be done so that people can stop the machine.
First, the filter
1. Each time the oil is changed, the filter should be replaced or thoroughly cleaned;
2. The air filter on the fuel tank is checked and cleaned every 3 months, preferably in 1 year.
3. If the oil quality of the color steel equipment is not clean, the filter will be abnormal and should be replaced;
Second, the hydraulic components 1. Clean the hydraulic components (substrate, valve, motor, pump, tubing, etc.) every month to prevent dirt from entering the system. Do not use cleaners.
2. After one month of use of the new machine, inspect whether there is any deformation in the bends of the tubing. If there is any abnormality, replace it. After using it for two months, fasten the joints of all accessories. When this work is done, it should be turned off. Pressure three, hydraulic circuit
1. Check the oil level of the tank every week. If the hydraulic system is repaired, check the oil level. If the oil level is lower than the oil window, the hydraulic oil should be filled.
2. The system oil temperature should be between 35 °C ~ 60 °C, not more than 70 °C, such as high oil and accessories will lead to deterioration.
3. The hydraulic oil used in this color steel machinery is ISOHM46 or MOBILDTE25;
Wuxi Shengda Yukun Energy Development co.,Ltd , https://www.xlite-solarlight.com