Flat paint construction skills


1. The substrate must be cleaned to ensure no oil, no dust and no rust. Can be pickled, phosphatized or white oil, solvent cleaning and other programs. 2, in order to prevent rust, a layer of anti-rust primer should be sprayed before the paint. Note that the strong solvent topcoat does not use a weak solvent primer, and the topcoat is sprayed after the primer is dry, otherwise it may bite the bottom. Where necessary, it is necessary to apply adhesion and better dry putty. 3, the construction viscosity is generally 16-22 seconds (coat 4 cups). The viscosity is too low, easy to sag, not easy to cover; high, surface flow adjustment, wrinkles, and even foaming, pitting. 4, the air pressure should be maintained at 0.5pa-0.8pa, to ensure good fog fogging, qiang distance is 25-30cm. 5. When spraying, it should be sprayed many times. Press first, then lower, first and second, then the main visual surface, first and then the outer spray. If the spray thickness of the last pass is too thin, there is less room for the film-forming material, and the paint film is rough and loses light. 6, baking paint according to the required temperature, time baking, heating too fast or too high temperature can cause loss of light. Please note that the oven temperature is uniform and the meter reading is accurate. These factors are the main reason for complaints about the quality of the paint.

Samarium Cobalt (SmCo) magnet is a high performance, low temperature coefficient permanent magnet, which made of samarium, cobalt and other rare earth elements. The biggest advantage is its high working temperature, the maximum working temperature is up to 300℃. It doesn't need to be coated because it is difficult to be eroded and oxidized. SmCo Magnet is widely used in motor, sensor, meter, electronic, watch, automobile, aviation and other applications. There are two alloy series for SmCo Magnets: SmCo5 and Sm2Co17.

Process Flow: Raw material--Mixing--Melting--Powdering--Pressing--Sintering--Magnetic Testing--Cutting & Grinding--Inspection--Packing and Shipping


SmCo Magnets

SmCo Magnet, SmCo Magnets, Samarium Cobalt Magnets, Samarium Cobalt Magnet

China-Base Ningbo Foreign Trade Co.,Ltd. Ningbo Songko(CBNB) Magnetic Material Co., Ltd. , http://www.cbnb-magnets.com

This entry was posted in on