Salt spray test tank salt ratio and use tips

The salt spray test chamber test method is divided into neutral salt spray test and acid salt spray test. The neutral salt spray test solution ratio is: sodium chloride is dissolved in purified water at a concentration of (50 ± 10) g / L. The pH of the test solution was determined to be 6.5 to 7.5 at 25 ° C using a pH test paper. When it is out of range, it can be adjusted by adding analytical hydrochloric acid or sodium hydroxide solution. The acid salt spray test solution ratio is: first dissolve sodium chloride in purified water, and then adjust the pH value of the solution with acetic acid to be in the range of 3.1 to 3.3, and the pH value is measured by the collected salt spray sample. The prepared solution needs to be filtered before use.
Salt spray test chamber / salt spray test machine product after-sales service:
Free installation and commissioning, free training of operators until the operator will operate independently.
The product shall be warranted for one year from the date of use by the user, except for human malfunction and damage.
Paid service is provided after the expiration of the warranty period.
If the product of the national free service hotline has quality problems, it will be answered within 15 minutes after receiving the repair call (or fax). If the problem cannot be solved in the phone, it will be handled by our professional maintenance personnel within 48 hours.
Beijing Yashilin salt spray test chamber, salt spray test machine, salt spray corrosion test box, salt spray box professional manufacturer, salt spray test box consultation hotline salt spray test box salt liquid ratio and use tips http://

High Tenacity and High Modulus PE Fiber, called as UHMWPE fiber, is high-tech fiber in 1990s. Regarded as one of the worlds three high performance fibers (carbon fiber, aramid fiber and PE fiber).

UHMWPE fiber possesses such characteristics as high molecular weight, high degree of orientation and high crystallization. And its tenacity is 15 times over steel and 10 times over normal chemical fiber. Besides its also low density, high modulus, UV resistance, corrosion resistance, outstanding anti-impact and anti-incision. It's the highest tenacity and lowest density bulletproof material in the world.

UHMWPE fiber is widely used in national defense equipment such as tank, armored car, bulletproof plate, bulletproof helmet, bulletproof jacket, cut-resistance jacket, cut-resistant gloves and fabric; and also used in composites field such as composites materials for aviation and spaceflight, ropes for navy vessel, trawling net, ocean cage against winds and waves, sports equipment and construction projects.

Ballistic Material

Ballistic Material, Ballistic Nylon Fabric, Ballistic Protection Materials, Anti Ballistic Materials


This entry was posted in on